Fila Hydrorep

Fila Hydrorep provides an invisible-look water-repellent protection for interior and exterior surfaces in natural stone or concrete.

WHAT IT’S FOR: 

• Protects exterior pavings from water and humidity
• Makes walls and claddings waterrepellent.
• Ideal for brick veneers and concrete.
• Protects grout joints.
• Protects from wear caused by atmospheric agents.

ADVANTAGES: 

• Gives a long-lasting, renewable protection that allows the material to breathe.
• Does not alter the appearance of the surface.
• Does not yellow despite environmental conditions or ageing.
• High penetration capacity.
• High coverage.
• Prevents formation of moss and mold.
• Certified as suitable for use on food contact surfaces.
• Prevents efflorescence.

How it is used

Do not dilute: Ready to use.

Application

Apply an even, generous coat onto a perfectly clean and dry surface with brush or roller. On vertical surfaces, the airless spray method is recommended. Apply until no more product can be absorbed. Depending on the absorbency of the substrate, a second coat may be required, after 24 hours. On low-absorbency natural stone (such as slate) apply one coat. For concrete or more porous natural stone two coats are needed. On exterior surfaces where oil-repellence is also required, apply a finishing coat of FILA FOB after 24 hours.

Maintenance:

diluted solution of FILA CLEANER

Caution:

When protecting low porosity natural stone, spot test the product in advance on a small trial surface to check for color changes Don’t apply the product if there is any risk of rain within 8 hours.

Write a review | No reviews for this product.