Floor cleaner, stain remover and wax stripper for terracotta, porcelain stoneware, glazed ceramic tiles, marble, unpolished stone, concrete, linoleum, PVC and quarry tiles.

WHAT IT’S FOR:

• Diluted: cleans and removes grease from dirty porcelain stoneware, ceramic, natural stone, terracotta and concrete floors.

• Undiluted: removes stubborn stains from porcelain stoneware.

• It is excellent for basic cleaning of acidsensitive stone.

• Ideal for basic cleaning of concrete.

• Wax remover for water based, metal or polishing wax.

ADVANTAGES:

• A 3-in-one solution: stain remover, detergent and wax remover.

• The only product that removes stubborn stains from porcelain stoneware.

• Cleans without damaging the surface.

• Extremely easy to use.

• Removes epoxy grout residues.

APPLICATION HINTS:

FILAPS87 can be used on a polished surface diluted no stronger than 1:10 as a periodic deep cleaner. It can also be used as a deep cleaner on a polished surface when the surface is already damaged, for example when the floor has been laid for a long time and/or has not been looked after properly and we would recommend it to be diluted 1:5 for this purpose. In all instances the solution should be rinsed well with clean water.

How it is used

Dilution: depending on use

To clean all surfaces:

Dilute 1:10 to 1:20 and apply to the surface. Leave to act for a few minutes then clean with a single disc professional cleaner or a scrubbing brush. Vacuum or wipe up dirt and then rinse with plenty of water. For a deeper clean, dilute to 1:5.

To remove stains from porcelain stoneware and to degrease

Pour undiluted directly onto the mark and over the entire surface of the tile. Allow to dry completely, then wash and rinse.

To remove wax

Dilute 1:5, spread and leave to act for a few minutes. Scrub with a scrubbing brush or a single disc cleaner. Vacuum or wipe up dirt and then rinse with plenty of water.

Caution:

1. Do not use on new marble or polished stone.

2. Do not use on wood.

3. Do not use on methacrylate tubs.

4. On linoleum: We advise checking the reaction on a small portion of the surface before apllying the product.